Penerapan Internet 0f Things (IoT) Dalam Membangun Sistem Aplikasi Kendali Rumah Kos Menggunakan Aplikasi Android
DOI:
https://doi.org/10.47065/bulletincsr.v3i4.246Keywords:
Internet of Things (IoT); RFID Reader; PIR SensorAbstract
Internet of Things (IoT) devices are now starting to be widely used, one of which is IoT Monitoring. The use of electricity by boarding house tenants is often negligent, they feel they have paid the boarding fee and are wasting electricity even though it is not used, for example, the lights in a boarding room where there are no people inside. Likewise with the bathroom if the water tub is full, often the occupants of the boarding house are indifferent to water. The use of ACS712 and ZMPT101B sensors to see the electricity usage of each boarding room. Boarding room security is strengthened by the use of RFID modules and PPIR sensors. Electrical tools and Solenoid Door Lock can be controlled via an android application. The accuracy of the sensor reading electricity usage is still below normal limits, namely 0.11% -0.74% for volts, and 0.72% -3.84% for current. In sending orders from the android application there is a delay in the response of the device due to factors that cannot be calculated, namely internet connection
Downloads
References
Achmad Furqon, dkk. “Rancang Bangun Sistem Monitroing dan Kendali Daya Listrik pada Rumah Kos Menggunakan NodeMCU dan Firebase Berbasis Android”. Techne Jurnal Ilmiah Elektronika. Vol.18 No.2. Universitas Diponegoro. 2019.
Selvi Mirthawati Setyorini, dkk. “Kualitas Pelayanan Pasang Baru Listrik Prabayar Bagi Calon Pelanggan
Rumah Tangga PT PLN (Persero) Rayon Kalisat di Kecamatan Sumber Jambe”. Jurnal Ilmu Administrasi Negara Universitas Jember. 2015.
Wibowo, Agung Prasetyo. “Rancang Bangun Prototype Alat Pencatat Penggunaan Listrik / KWH Meter Kamar
Kost Menggunakan Arduino”. Universitas PGRI Yogyakarta. 2017.
N. A. P. Baskoro, F., Widodo, A., Firmansyah, R., “Prototype Smarthome Dengan Catatan Waktu Saat Membuka Pintu Dan Kontrol Nyala Lampu Berbasis Internet of Things,” Indones. J. Electr. Electron. Eng, vol. 2, no. 1, pp. 29–34, 2019.
A. Emilia Hesti, “Aplikasi Android Sebagai Pengontrol Jarak Jauh Smarthome Dengan Koneksi Jaringan Internet,” J. Surya Energy, vol. 2, no. 2, pp. 157–165, 2018.
Y. Efendi, “Internet Of Things (Iot) Sistem Pengendalian Lampu Menggunakan Raspberry Pi Berbasis Mobile,” J. Ilm. Ilmu Komput., vol. 4, no. 1, pp. 19–26, 2018.
N. Deka Hardika, “Sistem Monitoring Asap Rokok Menggunakan Smartphone Berbasis Internet Of Things (Iot),” J. Sist. Inf. dan Telemat., vol. 10, no. 1, pp. 75–82, 2019.
R. Kristomson, “Sistem Keamanan Ruangan Berbasis Internet Of Things Dengan Menggunakan Aplikasi Android,” J. Tesla Tek. Elektro Univ. Tarumanegara, vol. 20, no. 2, pp. 127–134, 2018.
N. A. P. Baskoro, F., Widodo, A., Firmansyah, R., “Prototype Smarthome Dengan Catatan Waktu Saat Membuka Pintu Dan Kontrol Nyala Lampu Berbasis Internet of Things,” Indones. J. Electr. Electron. Eng, vol. 2, no. 1, pp. 29–34, 2019.
Andrian Eko Widodo and W. Aprih, “Kontrol Kipas Angin Menggunakan Aplikasi Blynk Berbasis Arduino Uno,” Conten, Computer and Network Technology , vol. 1, no. 2, pp. 79–84, 2021.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Internet 0f Things (IoT) Dalam Membangun Sistem Aplikasi Kendali Rumah Kos Menggunakan Aplikasi Android
ARTICLE HISTORY
How to Cite
Issue
Section
Copyright (c) 2023 UC Mariance, Irwan, Muhammad Aqsal Raihan Lubis
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
