Perancangan Sistem Pendukung Keputusan Berbasis Web Untuk Menentukan Asisten Laboratorium Komputer Menggunakan Algoritma Simple Additive Weighting
DOI:
https://doi.org/10.47065/bulletincsr.v3i3.240Keywords:
Decision Support System; Computer Laboratory Assistant; Simple Additive Weight; MySql; WebsiteAbstract
The computer laboratory is one of the facilities that support the learning process, therefore, a professional laboratory management system is required to assist lecturers with computer laboratory upkeep. In the process of selecting laboratory assistants it takes quite a long time, is less efficient and cannot save the history of selection results automatically. So this research will create a decision support system using the simple additive weighting method to assist lecturers in selecting computer laboratory systems efficiently. The criteria used for selection were the GPA (Cumulative Achievement Index), Hardware Installation Tests, Software Installation Tests, LAN Installation Tests, Programming Tests, and Interviews. The final results of calculations using the simple additive weighting method will choose 2 alternatives with the highest scores to become computer laboratory assistants, namely alternative 4 (X4) with a value of 0.97 and alternative 2 with a value of 0.91 (X2). The decision support system will be built based on a website and the database system will use MySql.
Downloads
References
“Permendikbud No. 3 Tahun 2020 tentang Standar Nasional Pendidikan Tinggi [JDIH BPK RI].” .
M. M. Mutoffar, R. D. Riupassa, and H. R. Suwarman, “Pelatihan Hardware & Software , Teknik,” vol. 1, no. 1, pp. 1–3, 2021.
D. O. Wibowo and A. Thyo Priandika, “Sistem Pendukung Keputusan Pemilihan Gedung Pernikahan Pada Wilayah Bandar Lampung Menggunakan Metode Topsis,” J. Inform. dan Rekayasa Perangkat Lunak, vol. 2, no. 1, p. page- xx~xx, 2021.
Z. Qatawneh, M. Alshraideh, N. Almasri, L. Tahat, and A. Awidi, “Clinical decision support system for venous thromboembolism risk classification,” Appl. Comput. informatics, vol. 15, no. 1, pp. 12–18, 2019.
S.-J. Eom and J. H. Kim, “The adoption of public smartphone applications in Korea: Empirical analysis on maturity level and influential factors,” Gov. Inf. Q., vol. 31, pp. S26–S36, 2014.
T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.
D. Witasari and Y. Jumaryadi, “Aplikasi Pemilihan Karyawan Terbaik Dengan Metode Simple Additive Weighting (Saw) (Studi Kasus Citra Widya Teknik),” JUST IT J. Sist. Informasi, Teknol. Inf. dan Komput., vol. 10, no. 2, p. 115, 2020.
A. Ibrahim and R. A. Surya, “The Implementation of Simple Additive Weighting (SAW) Method in Decision Support System for the Best School Selection in Jambi,” J. Phys. Conf. Ser., vol. 1338, no. 1, 2019.
Meirina, R. I. Desanti, and Wella, “Simple additive weighting algorithm helping recruitment system for waterpark,” Proc. 2019 5th Int. Conf. New Media Stud. CONMEDIA 2019, pp. 151–158, 2019.
2013) (Kotler, “Jurnal Mantik Jurnal Mantik,” Mobile-Based Natl. Univ. Online Libr. Appl. Des., vol. 3, no. 2, pp. 10–19, 2019.
A. R. Mahbub, M. Khaerudin, and I. Kharoh, “Penerapan Metode Saw (Simple Additive Weighting) Untuk Menentukan Siswa Berprestasi (Studi Kasus Pada SMP Negeri 24 Jakarta),” JSI (Jurnal Sist. Informasi) Univ. Suryadarma, vol. 9, no. 1, pp. 193–202, 2022.
A. Ahmad and Y. I. Kurniawan, “Sistem Pendukung Keputusan Pemilihan Pegawai Terbaik Menggunakan Simple Additive Weighting Decision Support System For Best Employee Selection Using,” J. Tek. Inform., vol. 1, no. 2, pp. 101–108, 2020.
N. Setiawan et al., “Simple additive weighting as decision support system for determining employees salary,” Int. J. Eng. Technol., vol. 7, no. 2.14 Special Issue 14, pp. 309–313, 2018.
H. A. Septilia and Styawati, “Sistem Pendukung Keputusan Pemberian Dana Bantuan Menggunakan Ahp,” J. Teknol. dan Sist. Inf., vol. 1, no. 2, pp. 34–41, 2020.
A. Fitrul Hadi, R. Permana, and H. Syafwan, “Decision Support System in Determining Structural Position Mutations Using Simple Additive Weighting (SAW) Method,” J. Phys. Conf. Ser., vol. 1339, no. 1, pp. 0–6, 2019.
A. Susanto, L. Latifah, and A. Fitriyani, “Decision support systems design on sharia financing using Yager’s fuzzy decision model,” in 2017 5th International Conference on Cyber and IT Service Management (CITSM), 2017, pp. 1–4.
R. B. I. N. M Mesran, Syefudin, Sarif Surorejo, Muhammad Syahrizal, Aang Alim Murtopo, Zaenul Arif, Nugroho Adhi Santoso, Wresti Andriani, Soeb Aripin, Gunawan, Pengantar Teknologi Informasi. CV. Graha Mitra Edukasi, 2023.
A. Pranolo and S. M. Widyastuti, “Simple additive weighting method on intelligent agent for urban forest health monitoring,” in 2014 International Conference on Computer, Control, Informatics and Its Applications (Ic3Ina), 2014, pp. 132–135.
F. Ardhy and D. M. Efendi, “Pemberian Reward Terhadap Karyawan Terbaik Dengan Mneggunakan Metode Simple Additive Weighting (SAW),” J. SIMADA (Sistem Inf. dan Manaj. Basis Data), vol. 2, no. 2, pp. 176–181, 2019.
F. N. Khasanah, R. Trias Handayanto, H. Herlawati, D. Thamrin, P. Prasojo, and E. S. H. Hutahaean, “Decision support system for student scholarship recipients using simple additive weighting method with sensitivity analysis,” 2020 5th Int. Conf. Informatics Comput. ICIC 2020, 2020.
R. P. Sari and E. Rasimin, “Sistem Pendukung Keputusan Pemilihan Kategori Skripsi Bagi Mahasiswa Sistem Informasi,” J. Sist. Komput. dan Inform., vol. 2, no. 3, pp. 339–347, 2021.
S. K. Simanullang and A. G. Simorangkir, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 472–478, 2021.
R. P. Sari and M. R. Maulana, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” J. Sist. Komput. dan Inform., vol. 2, no. 3, pp. 472–478, 2021.
J. D. Manik and A. R. Samosir, “Penerapan Metode Simple Additive Weighting dalam Penerimaan Siswa Magang pada Universitas Budi Darma,” sudo J. Tek. Inform., vol. 1, no. 2, 2022.
M. R. Hamdan, A. Triayudi, and A. Iskandar, “Komparasi Metode Simple Addtive Weighting dan Weight Product Menggunakan Sistem Pendukung Keputusan pada Penerimaan BLT,” JURIKOM (Jurnal Ris. Komputer), vol. 9, no. 5, pp. 1543–1550, 2022.
A. I. Lubis, P. Sihombing, and E. B. Nababan, “Comparison SAW and MOORA Methods with Attribute Weighting Using Rank Order Centroid in Decision Making,” Mecn. 2020 - Int. Conf. Mech. Electron. Comput. Ind. Technol., pp. 127–131, 2020.
A. Alim Murtopo and R. Aynuning Putri, “Perancangan Sistem Pendukung Keputusan Seleksi Penerimaan Pegawai Menggunakan Metode SAW pada PDAM Tirta Dharma Tegal Decision Support System Design Selection Recruitment of Employees Using Simple Additive Weighting (SAW) Method in PDAM Tirta Dharma Tegal,” Citec J., vol. 3, no. 2, 2016.
F. P. Hutagaol, Mesran, and J. H. Lubis, “Penerapan Metode Simple Additive Weighting (SAW) dalam Pemilihan Handphone Bekas,” Bull. Inf. Technol., vol. 2, no. 2, pp. 63–68, 2021.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Perancangan Sistem Pendukung Keputusan Berbasis Web Untuk Menentukan Asisten Laboratorium Komputer Menggunakan Algoritma Simple Additive Weighting
ARTICLE HISTORY
How to Cite
Issue
Section
Copyright (c) 2023 Rosma Siregar, Erita Astrid, Muhammad Dani Solihin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
