Rancang Bangun Sistem Keamanan Kotak Persembahan Gereja Berbasis Internet of Things (IoT) Menggunakan Metode Research and Development (R&D)
DOI:
https://doi.org/10.47065/bulletincsr.v6i6.1393Keywords:
ESP8266; AS608 Fingerprint Sensor; Security System; IoT; TelegramAbstract
The security of church offering boxes needs to be addressed to prevent unauthorized access and support more effective monitoring of the box condition. This study aims to design and develop an Internet of Things (IoT)-based security system for church offering boxes that can perform user authentication, control access to the lock, detect box opening conditions, and send security information in real time. The Research and Development (R&D) method was applied through the stages of requirements analysis, design, development, implementation, and prototype testing. The system combines a NodeMCU ESP8266, an AS608 fingerprint sensor, a solenoid lock, a magnetic door switch, an OLED display, and Telegram notification. The results showed that all three trials using registered fingerprints successfully granted access, while two trials using unregistered fingerprints were successfully rejected. The system also successfully delivered Telegram notifications in all five notification types, with response times ranging from 0.9 to 1.3 seconds. The lockdown mechanism was activated after five consecutive authentication failures for three minutes, forced opening detection operated successfully, and local security functions remained operational when the Wi-Fi connection was unavailable. The novelty of this study lies in integrating fingerprint authentication, forced-opening detection, a lockdown mechanism, Telegram-based control, and testing of local security functions under Wi-Fi loss in a single prototype for church offering boxes, using non-blocking firmware that prioritizes local processing (hardware-first). The contribution is the prototype design, this firmware architecture, and functional test data that can serve as a reference for developing similar systems.
Downloads
References
A. Rahman, M. Hanafi, R. Aswar, and I. A. Saputro, “Sistem keamanan kotak amal masjid berbasis wireless sensor network dan SMS gateway,” in Seminar Nasional Amikom Surakarta (SEMNASA), Sukoharjo, Indonesia, Nov. 2024. [Online]. Available: https://ojs.amikomsolo.ac.id/index.php/semnasa/issue/view/2.
A. Annabawi and F. H. S. Pratama, “Rancang bangun sistem keamanan pada kotak penyimpanan uang (Moneybox Plus) berbasis mikrokontroler Arduino,” Inf. Technol. J., vol. 10, no. 1, pp. 59–68, 2024, doi: 10.30742/melekitjournal.v10i1.293.
D. Hermawan, J. Jufrizel, A. Ullah, and A. Faizal, “Rancang bangun keamanan kotak amal dengan akses fingerprint menggunakan ESP32-Cam dan Telegram berbasis IoT,” J. Media Inform. Budidarma, vol. 7, no. 3, pp. 1013–1021, 2023, doi: 10.30865/mib.v7i3.6252.
A. Y. Chanifudin, S. D. Ayuni, A. H. Falah, and I. Sulistiyowati, “Automatic safe security system using pin code and fingerprint based on microcontroller with Telegram notification,” J. Electr. Eng. Comput. (JEECOM), vol. 7, no. 2, pp. 312–320, 2025, doi: 10.33650/jeecom.v7i2.11972.
A. B. Sinabang, Martias, and H. Adianto, “Alat pengaman brankas berbasis fingerprint menggunakan NodeMCU ESP8266 notifikasi Telegram,” INSANtek, vol. 4, no. 1, pp. 18–24, 2023, doi: 10.31294/insantek.v4i1.2121.
S. Z. Amalia, “Prototype sistem pengaman dan pelacak brankas menggunakan fingerprint dan GPS berbasis Internet of Things,” Skripsi, Universitas Islam Sultan Agung, Semarang, Indonesia, 2023. [Online]. Available: https://repository.unissula.ac.id/id/eprint/33009.
H. I. Ramadhan and R. Supriyanto, “Prototype sistem keamanan brankas berbasis sensor sidik jari,” J. Ilm. Komputasi, vol. 23, no. 1, pp. 131–138, 2024, doi: 10.32409/jikstik.23.1.3519.
F. E. Safitri and T. Ta’ali, “Rancang bangun pengaman pintu otomatis menggunakan sidik jari (fingerprint) dan password berbasis Arduino,” J. Tek. Elektro Indones. (JTEIN), vol. 3, no. 2, pp. 425–436, 2022, doi: 10.24036/jtein.v3i2.269.
G. M. Kadena, K. A. Yasa, and I. G. S. Widharma, “Rancang bangun sistem pengaman pintu brankas menggunakan fingerprint dan keypad berbasis Arduino,” Tugas Akhir, Politeknik Negeri Bali, Indonesia, 2023. [Online]. Available: https://repository.pnb.ac.id/id/eprint/10404/1/RAMA_36304_1815344054_full.pdf.
I. U. V. Simanjuntak and L. B. P. Asmara, “Rancang bangun sistem keamanan sepeda motor menggunakan fingerprint dan GPS tracker berbasis IoT,” Techné J. Ilm. Elektroteknika, vol. 21, no. 1, pp. 31–44, 2022, doi: 10.31358/techne.v21i1.305.
N. R. Maulana and R. Djutalov, “Implementasi metode SDLC untuk pembuatan sistem penguncian pintu menggunakan fingerprint dengan modul NodeMCU ESP8266 berbasis Internet of Things,” LOGIC J. Ilmu Komput. Pendidik., vol. 1, no. 1, pp. 40–49, 2022. [Online]. Available:https://journal.mediapublikasi.id/index.php/logic/article/download/1312/663.
A. Ardiansah, M. Nuraeni, Ridwang, and Adriani, “Rancang bangun akses kunci pintu otomatis menggunakan fingerprint berbasis Internet of Things (IoT),” Vertex Elektro, vol. 16, no. 2, pp. 31–39, Aug. 2024, doi: 10.26618/jte.v16i2.15704.
N. A. Zuhriyah and S. Rosyadi, “Smart charity box with ESP32 and chatbot,” J. Robot. Autom. Electron. Eng., vol. 2, no. 2, pp. 87–99, Sep. 2024, doi: 10.21831/jraee.v2i2.613.
A. A. Mahligai, N. Iksan, P. Gunoto, and I. Y. Panessai, “Perancangan sistem keamanan brankas dengan verifikasi password dan sidik jari berbasis IoT,” Sigma Teknika, vol. 5, no. 1, pp. 100–107, Jun. 2022, doi: 10.33373/sigmateknika.v5i1.4141.
W. A. S. Lestari and T. Z. Vitadiar, “Sistem keamanan pintu pagar menggunakan fingerprint dan alarm sebagai pengaman dengan notifikasi Telegram berbasis Internet of Things (IoT),” Inovate J. Ilm. Inov. Teknol. Inf., vol. 8, no. 2, pp. 92–101, 2024, doi: 10.33752/inovate.v8i2.6165.
A. Z. Nusri and A. Alimuddin, “Rancang bangun security door lock menggunakan fingerprint berbasis mikrokontroler,” J. Ilm. Sist. Inf. Tek. Inform. (JISTI), vol. 5, no. 1, pp. 23–28, 2022, doi: 10.57093/jisti.v5i1.105.
Koesmarijanto, N. Hidayati, D. D. Cahyani, and N. B. Anto, “Smart locker menggunakan fingerprint dan face recognition sebagai sistem keamanan loker penyimpanan,” J. Appl. Smart Electr. Netw. Syst. (JASENS), vol. 4, no. 2, pp. 68–76, 2023, doi: 10.52158/jasens.v4i2.834.
M. T. A. Farisi, F. N. Azis, A. M. Fernanda, and P. Pramono, “Rancang bangun sistem keamanan kendaraan 2WD berbasis ESP32 dengan autentikasi sidik jari dan pelacakan lokasi melalui Telegram,” in Prosiding Seminar Nasional Teknologi Informasi dan Bisnis (SENATIB), 2025, pp. 1034–1042, doi: 10.47701/gvp1gq02.
Sugiyono, Metode Penelitian Kuantitatif, Kualitatif, dan R&D, 2nd ed., 5th printing. Bandung, Indonesia: Alfabeta, 2023, ISBN: 978-602-289-533-6.
M. Safii et al., “Monitoring ketinggian permukaan air menggunakan Telegram bot berbasis NodeMCU ESP8266,” METIK J., vol. 6, no. 2, pp. 123–132, 2022, doi: 10.47002/METIK.V6I2.384.
A. Syahri and M. Basri, “Perancangan sistem keamanan untuk deteksi pencurian menggunakan sensor magnetic dan RFID berbasis Internet of Things,” Hello World J. Ilmu Komput., vol. 4, no. 3, pp. 163–170, 2025, doi: 10.56211/helloworld.v4i3.1166.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Sistem Keamanan Kotak Persembahan Gereja Berbasis Internet of Things (IoT) Menggunakan Metode Research and Development (R&D)
ARTICLE HISTORY
How to Cite
Issue
Section
Copyright (c) 2026 Kasianus Yosef Yoel, Ahmad Fajri, Kusnandar Kusnandar
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
