Rancang Bangun Bel Otomatis pada STIKOM Tunas Bangsa Berbasis Arduino dengan Output Suara
DOI:
https://doi.org/10.47065/bulletincsr.v1i3.124Keywords:
Arduino Uno; RTC; Keypad Shield; Microcontroller; Arduino IDEAbstract
The bell is certainly no stranger to the world of education. In general, the bell still uses human power to ring it. It is still rare in the world of education to use an automatic bell that can work alone according to the specified time in the teaching and learning process. The purpose of designing the automatic bell at STIKOM Tunas Bangsa Pematangsiantar is to simplify the work of picket officers and optimize the right time for the teaching and learning process. The work process of this tool is to input the predetermined class hours into the Arduino Uno Microcontroller using the C language in the Arduino IDE Software. After that the Microcontroller will read the schedule program for lessons that have been input into the Microcontroller. If the input program matches today's class time schedule, the bell will automatically issue the output in the form of an information notification sound. This tool also has a 16x2 Keypad Shield for manual setting in a matched test mode within the current exam time and automatically generates a notification sound output, where this automatic buzzer is fully controlled by the Arduino Uno Microcontroller command and the timing that has been set in the RTC ( Real Time Clock) as a time saver
Downloads
References
Abdul Kadir., (2018). ARDUINO MEGA Panduan Untuk Mempelajari Pembuatan Berbagai Proyek Elektronika.
Alhamidi, A., & Asmara, R. (2017). Rancang Bangun Timbangan Badan Output Suara Berbasis Arduino Uno R3. Jurnal Sains Dan Informatika, 3(2), 142. https://doi.org/10.22216/jsi.v3i2.2910.
Cholish, C., Rimbawati, R., & Hutasuhut, A. A. (2017). Analisa Perbandingan Switch Mode Power Supply (SMPS) dan Transformator Linear Pada Audio Amplifier. CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro, 1(2), 90–102. https://doi.org/10.22373/crc.v1i2.2079.
Dendy Kurniawan., (2018). Rancang Bangun Alat Musik Piano, Harpa, Marching Bell Digital Berbasis Arduino Menggunakan Cahaya Laser dan LDR (Studi Kasus : SMP NU 07 Brangsong) ,. Vol 11, No.1
Feriska, A., & Triyanto, D. (2017). Rancangan Bangunan Penjemur Dan Pengering Pakaian Otomatis Berbasis Mikrokontroler. Jurnal Coding Sistem Komputer Untan, 5(2), 67–76.
Linarta, A., & Nurhadi, N. (2018). Aplikasi Bel Sekolah Otomatis Berbasis Arduino Dilengkapi Dengan Output Suara. I N F O R M a T I K A, 10(2), 1. https://doi.org/10.36723/juri.v10i2.108
Lutfiyana., N.Hudallah., & A, Suryanto. (2017). Rancang Bangun Alat Ukur Suhu Tanah, Kelembapan Tanah, dan Resistansi. Jurnal Teknik Elektro, 9(2).
Marpaung, N. (2017). Perancangan Prototype Jemuran Pintar Berbasis Ardunio Uno R3 Menggunakan Sensor LDR Dan Sensor Air. Riau Journal Of Computer Science, 3(2), 71–80.
Qory Hidayati, A. N. A. (2018). Rancang bangun bel otomatis berbasis rtc ds3231 menggunakan arduino uno r3 sebagai tanda pergantian jadwal. 6(1), 1–8.
Sarmidi1, A. N. (2019). Jurnal manajemen dan teknik informatika. Rancang Bangun Sistem Informasi Pengolahan Bank Sampah Puspasari Kecamatan Purbaratu Kota Tasikmalaya, 02(01), 181–190.
Wardani, K. (2018). Rancang Bangun Modul Pembelajaran Komunikasi Data Serial untuk Mata Kuliah Komunikasi Data Program Studi Teknik Telekomunikasi. 2(November 2018).
Yasin, M., & Irfana, M. S. (2017). Bel Otomatis Virtual Dual Channel Berbasis Android. Systemic: Information System and Informatics Journal, 3(1), 33–40. https://doi.org/10.29080/systemic.v3i1.193
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Bel Otomatis pada STIKOM Tunas Bangsa Berbasis Arduino dengan Output Suara
ARTICLE HISTORY
How to Cite
Issue
Section
Copyright (c) 2021 Fachrul Hasby, S Sumarno, Fitri Anggaini, Iin Parlina, Zulaini masruro Nasution
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
